Metal Restoration

Dramatically Reduce Cooling Costs and Extend Roof Life

1. Surface Prep

  • Wash with TSP substitute and water; rinse or power wash
  • Remove rust and corrosion with wire brush, apply quality rust inhibiting primer
  • Roof system must be clean and dry with surface temperature below 115°F at time of application
  • All underlying materials must be fully cured

2. Repair & Seal

  • Replace missing fasteners
  • Tighten all fasteners, seal all fasteners and seams with ERSystems® H.E.R. sealant

3. Prime

4. Finish Coat

  • Apply two coats of appropriate E-Las-Tek® topcoat
  • Apply with 1/2″ or 1-1/4″ nap roller or airless spray
  • Minimum two coats (20 Mils DFT total) for service life warranty

Before & After Photo

metal 1

metal 2


  • Reduce energy costs
  • Slow the aging process
  • Decrease future maintenance cost
  • Change the life cycle of the roof